Table of Contents
Advertisement
CONNECT WATER COOLER TO PRINTER
The printer needs to be connected to a water
cooler. InfoSight recommends a CoolMate water
cooler.
Connect the inlet and outlet water lines between
the cooler and the printer. It does not matter
which connection is which in the printer – the
water will flow in either direction. The
connection points are circled in the photo to the
right. Note – the printer is shipped with a short
tube connected to each connection point. This is
to keep the connections and internal water lines
clear.
Plug the cooler into an outlet. There is no
automatic control between the printer and the
cooler. The cooler needs to be running when the
printer is. It is the operator's responsibility to
ensure the cooler is running.
Page 2
Copyright © 2003-2021 InfoSight Corporation All Rights Reserved
LL28XX Tag Printer
Advertisement
Table of Contents
