Table of Contents
Advertisement
NL Troubleshooting
Malfunction
Spin result is
not to satisfaction-
ness. The laundry is
too wet / too damp.
Detergent residue on
the damp laundry. which settle on the laundry.
Detergent residue on
the dry laundry.
At the water supply
feed hose is leaking water.
Water is leaking from
the water drain hose.
60
Cause and Troubleshooting
Make sure that the drain pipe and water drain
▶
feed hose is not kinked or pinched.
The unbalance detection system has aborted the spin
cycle due to uneven distribution of the laundry.
Redistribute the laundry in the drum.
▶
Remark: If possible, place large and small items of
laundry together in the drum. Laundry of different
sizes distributes itself better when spinning.
Start the program Centrifuge.
▶
Unbalance control system compensates for
imbalance through reduced spin speed.
Redistribute the laundry in the drum.
▶
Remark: If possible, place large and small items of
laundry together in the drum. Laundry of different
sizes distributes itself better when spinning.
Start the program Centrifuge.
▶
Detergents can contain water-insoluble substances
Start the program To rinse .
▶
Detergents can contain water-insoluble substances,
which deposit on the laundry.
Brush the laundry after washing and drying.
▶
The water inlet hose is not correctly / firmly
connected.
Connect the water supply hose correctly. Connect
1.
water supply hose
Tighten the coupling properly.
2.
Water drain hose is damaged.
Replace the damaged water drain hose.
▶
Water drain hose is not connected correctly.
Connect the water drain hose correctly. connection type
▶
for water drainage
Advertisement
Table of Contents
