Table of Contents
Advertisement
NL Cleaning and maintenance
Loosen the hose clamp and carefully
3.
pull off the water drain hose.
Residual water can run!
Clean the water drain hose and the
4.
siphon connection.
5.
50
16.7 Clean the strainer in the
water supply.
Empty the water inlet hose
Close the water tap.
1.
Set a schedule, but
2.
not Rinse , Spin or
pump down.
Start program and let it run for
3.
approx. 40 seconds.
Turn off the device.
4.
Disconnect the plug of the device
5.
from the mains.
Cleaning the strainer of the water tap
Remark: Take the information on the
topic of safety → Page 4
and avoid material damage
→ Page 11 take care of your device
to use safely.
Required: The water supply hose is
empty.
Remove the water inlet hose from
1.
the water tap.
Advertisement
Table of Contents
