Table of Contents
Advertisement
Chapter 3 Setup
1.2
Power ON from Network Serial Port
Depending on the BIOS setting of the CPU blade, the power of the CPU blade may be automatically turned on
by a proper packet received from the network or via the modem connected to the serial port.
This power-on procedure can be specified by setting Wake On Events of System Hardware in the BIOS
SETUP Utility.
1.3
Power ON from Remote Console
The power of the CPU blade can be turned on by using remote control feature of EXPRESSSCOPE Engine 3
(BMC).
1.4
Operation after Power ON
If the CPU blade is connected with a display unit, the NEC logo appears on the screen of the display unit after
a while from the power-on.
While the NEC logo appears, the CPU blade runs the self-diagnosis program (POST) to diagnose the
CPU blade itself. Refer to Chapter 3 (1.5 POST).
84
Do not power off the server until NEC logo and some message appears.
Important
Express5800/B120e User's Guide
1. Power-on of Blade Server
Advertisement
Table of Contents
