Returning To The Beginning Of The Pattern; Saving A Pattern - Brother Innov-is NV1100 Operation Manual

Returning to the beginning of the pattern

You can return to the beginning of the pattern after trial
sewing or when the stitching is sewn incorrectly.
a
Press the "Start/Stop" button to stop the machine, and
then press .
→ Sewing returns to the beginning of the selected
pattern ("W") from the point where sewing was
stopped.
Memo
• If this key is pressed when sewing is stopped,
patterns can be added at the end of a combined
stitch pattern. (In this example, "!" is added.)
b
Press the "Start/Stop" button to continue sewing.
Sewing the Various Built-in Decorative Patterns

Saving a pattern

Combined patterns can be stored for later use. Since stored
patterns are not lost after the sewing machine is turned off,
they can be recalled at any time. Up to 15 patterns can be
stored.
a
Create the combined pattern that you wish to store.
• For details, refer to "Combining patterns" on
page D-5.
b
Press on the operation panel.
→ A screen showing the list of pockets appears, and an
empty pocket is selected.
c
Press .
• Do not turn off the sewing machine while the pattern
is being stored, otherwise the pattern data may be
lost.
Memo
• To select the pocket where the pattern is to be
saved, press
desired pocket, and then press
• If the pattern is saved in a pocket where a stitch is
already saved, the stitch is overwritten.
• If an empty pocket is not available, select a
pocket which contains a pattern that can be
overwritten.
• Use to scroll the selected pocket
horizontally to confirm the whole pattern.
• Once the pattern has been saved in pocket, it can
not be deleted without overwriting. When you
wish to delete a pattern in the pocket, press
without selecting a pattern.
or to specify the
.
Decorative sewing D-9
D