Brother Innov-is NV1100 Operation Manual page 47

Sewing
d Press (Reverse stitch button) or
stitch button).
1 Reverse stitches (or reinforcement stitches)
→ The machine will sew reverse stitches (or
reinforcement stitches) and stop.
Memo
• To turn off the automatic reinforcement stitching
function, press
The operation performed when the button is pressed differs
depending on the selected pattern. Refer to the following table
for details on the operation that is performed when the button
is pressed.
Reverse stitch
button
When the automatic Machine starts
reinforcement sewing the stitches
stitching function is and only sews
not active while reverse stitches
selecting utility while holding the
stitches like Reverse stitch
examples shown button.
below
When the automatic Machine starts
reinforcement
sewing the stitches
stitching function is
and only sews
not active while
reverse stitches
selecting utility
stitches like while holding the
examples shown
Reverse stitch
below
button.*
When the automatic Machine sews
reinforcement
reverse stitches at
stitching function is
the beginning and
active while selecting
end of sewing.
utility stitches like
examples shown
below
When the automatic Machine sews
reinforcement
reinforcement
stitching function is
stitches at the
active while selecting
beginning and
utility stitches like
examples shown reverse stitches at
below
the end of sewing.*
B-38
(Reinforcement
so that the key is no longer lit.
Reinforcement
stitch button
Machine starts
sewing the stitches
and sews 3 - 5
reinforcement
stitches while
holding the
Reinforcement stitch
button.
Machine starts
sewing the stitches
and sews 3 - 5
reinforcement
stitches while
holding the
Reinforcement stitch
button.
Machine sews
reverse stitches at
the beginning and
reinforcement
stitches at the end of
sewing.
Machine sews
reinforcement
stitches at the
beginning and end of
sewing.
Reverse stitch
button
When the automatic Machine starts
reinforcement
sewing and then
stitching function is
sews reinforcement
not active while
stitches while
selecting character/
decorative stitches holding the Reverse
stitch button.
When the automatic Machine sews
reinforcement
reinforcement
stitching function is
stitches at the
active while selecting
beginning and sews
character/decorative
stitches reinforcement
stitches when the
Reverse stitch
button is pressed.
* If (Reinforcement priority) in the settings
screen is set to "ON", reinforcement stitches are
sewn instead of reverse stitches.
Reinforcement
stitch button
Machine starts
sewing at the
beginning, then
completes the
pattern and sews
reinforcement
stitches at the end of
sewing.
Machine sews
reinforcement
stitches at the
beginning, then
completes the
pattern and sews
reinforcement
stitches at the end of
sewing.