Adjusting The Projected Image - Eiki EIP-X200 Owner's Manual

Adjusting the Projected Image

Adjusting the Projector Height
The projector is equipped with an elevator foot to adjust the image height.
To raise the image:
1. Press the elevator button.
2. Raise the image to the desired height angle, then release the button to lock the
elevator foot into position.
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the elevator foot into position.
To avoid damaging the projector, make sure that the elevator foot is
fully retracted before placing the projector in its carrying case.
EN-18
Elevator button
Elevator foot