Table of Contents
Advertisement
Language (Computer / Video Mode)
Choose the multilingual OSD menu. Use
"
/
/ Enter" to finalize the selection.
Advanced (Computer / Video Mode)
Auto Source Select
Automatically scans the input source. Press "
selection.
Rear
The image is reversed horizontally. Press "
selection.
Ceiling
The image is inverted vertically. Press " /
ECO/Hi_Alt Mode
Use this function to dim the projector lamp light output which will lower power
consumption and increase lamp life, or/and turning on High Altitude mode operates the
fans at full speed continuously to allow for proper high altitude cooling of the projector.
Lamp Hours
Displays Hour the lamp's elapsed operating time (in hours).
Color Space
Manually selects signal type.
RGB
YCbCr
YPbPr
Auto Shutdown
Uses this function to automatically turn off the lamp if the projector does not detect an
input signal for specified time period (30 minutes).
OSD Timeout
Duration OSD menu stays active (at idle state by second).
Menu Position
Choose the menu position on the display screen.
Factory Reset
Press "
/
/ Enter" to enter its menu. Use
/ Enter" to return the display parameters on all menus to the factory default settings.
Audio (Computer / Video Mode)
Volume
Press
to decrease the volume.
Press
to increase the volume.
Mute
Choose "ON" to turn mute on.
Choose "OFF" to turn mute off.
/
to select your preferred language. Press
/
/ Enter" to confirm or cancel the
/
/ Enter" to confirm or cancel the
/ Enter" to confirm or cancel the selection.
/
to choose "
" and press "
/
EN-25
Advertisement
Table of Contents
