Table of Contents
Advertisement
Functionality
Configuration
To configure Lightcloud products, use the Web Application
(control.lightcloud.com) or call 1(844) LIGHTCLOUD.
1 (844) LIGHTCLOUD
support@lightcloud.com
Operating Modes
CONTROLLER: Provides switching and dimming for a single zone.
REPEATER: Extends the Lightcloud mesh network without
controlling a load.
TRIGGER: Detect when an attached circuit is open or closed. For
example, you could attach the Controller in Trigger mode to an
existing occupancy sensor to allow your Lightcloud system to
react to the sensor.
OCCUPANCY LOCAL: Use an attached sensor to control the
Controllers load.
OCCUPANCY CUSTOM: Use an attached sensor to control the
load of any Zone in the Lightcloud site.
WE ' RE HERE TO HELP:
or 1 (844) 544-4825
Advertisement
Table of Contents
Need help?
Do you have a question about the LCCONTROL20/D10 and is the answer not in the manual?