Gainsborough Pk2 Bronze Flame H240 Instructions For Use

Pk2 Bronze Flame Solar Stakes
H240
v0: 07/10/20
Please read and retain these instructions for future reference
ALWAYS POSITION IN DIRECT SUNLIGHT FOR BEST CHARGING
Contains: 1 x 1.2 V 300mAh DC NiMH
Dimensions
Rechargeable battery (not replacable)
17 x7 x90cm
LED not replaceable
•
SOLAR POWERED FLAME SHAPED LIGHTS ON STAKE
•
THE CRACKLED GLOBES IN THE CENTRE OF THE FLAMES
GIVE OFF A WARMING AND RELAXING GLOW
AUTOMATICALLY AT NIGHT
•
SUPPLIED AS A PACK OF 2
•
WOULD LOOK GREAT LINING PATH, OR AMONGST
FLOWER BEDS
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts
have been removed from the packaging.
To easily insert stakes into the ground, it is recommended
to wet the ground first. To avoid damaging garden stakes
when inserting into the ground, select a spot in soft, rock-
free soil. Insert the base of the stake first then gently insert
the rest of the stake into the base. DO NOT push directly
against the solar cell or the ornament housing containing
the actual LED light.
Install the solar product in an area where it can get direct
sunlight.
Leave the switch to "ON" position.
Select an outdoor location away from other light sources at
night, such as street lights. It may cause the product not to
turn on automatically at night.
Duration of light depends on solar product's level of
sunlight exposure, geographical locations, weather
conditions and the hours of daylight.