Table of Contents
Advertisement
modem, and then run UI program.
●
Two methods to run UI software:
a.
Click the shortcut menu: Applications->Internet-> ZTEMTUI
Execute ztemtapp command through terminal program
b.
a)
After running UI in this way, the following information will display on the
terminal, which will be used to track the problem.
b)
If the shared library required by UI are not completely installed, you will
see the system prompt of missing libaudio2 library after executing
ztemtapp command.
See the figure below:
The default dialer will appear as follows.
17
Advertisement
Table of Contents
Troubleshooting
