Advanced Chipset Features - Intel P43 User Manual

During POST, BIOS will determine if the floppy disk drive installed is 40 or 80 tracks.
360K type is 40 tracks while 760K, 1.2M and 1.44M are all 80 tracks.
Boot Up NumLock Status
The default value is On.
On (default)
Off Keypad is arrow keys.
Security Option
This category allows you to limit access to the system and Setup, or just to Setup.
System
Setup (default) The system will boot, but access to Setup will be denied if the correct
MPS Version Control For OS
This option is only valid for multiprocessor motherboards as it specifies the version of the
Multiprocessor Specification (MPS) that the motherboard will use.
OS Select For DRAM > 64MB
Allows OS2 ® to be used with >64MB or DRAM. Settings are Non-OS/2 (default) and OS2.
Set to OS/2 if using more than 64MB and running OS/2 ® .
HDD S.M.A.R.T Capability
The settings are: Disabled and Enabled.
3-6

Advanced Chipset Features

The Advanced Chipset Features Setup option is used to change the values of the chipset
registers. These registers control most of the system options in the computer.
DRAM Timing Selectable
*DRAM CAS Latency Time
*DRAM RAS# TO CAS# Delay
*DRAM RAS# Precharge Time
*DRAM Cycle Tiem
*DRAM Write Recovery Time
*DRAM Min Ref to Act/CMD Time
*DRAM Int Wrt to Rd Delay
*DRAM Row Act to Row Act Delay
*DRAM Int Rd to Pre Delay
System BIOS Cacheable
Memory Hole at 15-16M
PCI Express Root Port Function
Force PEG to x1
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
System BIOS Cacheable
Keypad is numeric keys.
The system will not boot and access to Setup will be denied if the
correct password is not entered at the prompt.
password is not entered prompt.
1.4
Phoenix – AwardBIOS CMOS Setup Utility
Advanced Chipset Features
Auto
Disabled
Disabled
Press Enter
F6:Optimized Defaults
By SPD
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Disabled
F7:Standard Defaults
33
Item Help
Menu Level >