Advertisement
Quick Links
Thank you for purchasing WISE-7xxx – one of the most cost-effective automation
solutions for remote monitoring and control applications. This Quick Start Guide will
provide you with minimum information to get started with WISE-7xxx. It is intended for
use only as a quick reference. For more detailed information and procedures, please
refer to the full user manual on the CD included in this package.
In addition to this guide, the package includes the following items:
WISE-71xx / WISE-790x
Series Module
WISE-71xx / WISE-72xx User Manual
CD : \WISE-71xx\document\User Manual\
ftp://ftp.icpdas.com/pub/cd/wise_cd/wise-71xx/document/user manual/
WISE-75xxM User Manual
CD : \WISE-75xxM\document\User Manual\
ftp://ftp.icpdas.com/pub/cd/wise_cd/wise-75xxM/document/user manual/
WISE-790x User Manual
CD : \WISE-790x\document\User Manual\
ftp://ftp.icpdas.com/pub/cd/wise_cd/wise-790x/document/user manual/
WISE Website
http://wise.icpdas.com/
Quick Start Guide for WISE-7xxx Series Module Version 1.3
Quick Start Guide for
WISE-7xxx Series Module
WISE-72xx
WISE-75xxM
Series Module
Series Module
ICP DAS Website
http://www.icpdas.com/
December 2016, Version 1.3
Software Utility
CD
1
Advertisement
Related Manuals for ICP DAS USA WISE-7 Series
Summary of Contents for ICP DAS USA WISE-7 Series
- Page 1 Quick Start Guide for WISE-7xxx Series Module December 2016, Version 1.3 Thank you for purchasing WISE-7xxx – one of the most cost-effective automation solutions for remote monitoring and control applications. This Quick Start Guide will provide you with minimum information to get started with WISE-7xxx. It is intended for use only as a quick reference.
- Page 2 -------------------------------------------- Configure Boot Mode Make sure the switch is in the “Normal” position. (except WISE-75xxM) ---------------------------------------------------------------------------------- Connect to Network, PC and Power Connect to Ethernet hub/switch and PC via the RJ-45 Ethernet port. Non-PoE WISE-72xx / WISE-75xxM support POE only on E1 port.
- Page 3 --------------------------------------------------------------------------------- Install MiniOS7 Utility Step 1: Get the MiniOS7 Utility tool The MiniSO7 Utility can be obtained from companion CD or our FTP site: CD: \Tools\MiniOS7_Utility\ ftp://ftp.icpdas.com/pub/cd/wise_cd/tools/minios7 utility/ Step 2: Follow the prompts to complete the installation After the installation has been completed, a new short-cut for MiniOS7 Utility will appear on the desktop.
- Page 4 ---------------------------------------------------------------------------------- Assign a New IP by MiniOS7 Utility WISE-7xxx comes with a default IP address; please assign a new IP address to the WISE module. The factory default IP settings are as follows: Item Default IP Address 192.168.255.1 Subnet Mask 255.255.0.0 Gateway 192.168.0.1...
- Page 5 Step 3: Select the module name and then click “IP setting” from the toolbar Select the module name from the list of the fields, and then click “IP setting” from the toolbar. Step 4: Assign a new IP address and then click “Set” button Step 5: Click “Yes”...
- Page 6 ---------------------------------------------------------------------------------- Go to WISE-7xxx Web Site to edit control logic. Please follow the steps below to implement IF-THEN-ELSE control logic on controllers: Step 1: Open a browser Open a browser (recommended internet browsers: Mozilla Firefox or Internet Explorer). Step 2: Type in the URL address of the WISE-7xxx Make sure the IP address assigned is accurate (please refer to section 4: “Assign a New IP by MiniOS7 Utility).
- Page 7 Step 4: Edit Basic Settings Modify the Alias of the WISE module, Ethernet setting of the WISE module, the analog input/output range, or the downloading password in the Basic Setting page as needed. Step 5: Edit Advanced Settings Edit channel attribute, internal register, Timer, Email, CGI commands, Recipe, and P2P configuration settings in the Advanced Setting page as needed.
- Page 8 Step 6: Edit Rule Settings Edit your IF-THEN-ELSE rules in the Rules Setting page. Step 7: Download to Module After finishing rules setting, download the rules to the WISE module. The WISE module will reboot and execute the rules automatically. Step 8: For more detail information, please refer to WISE User Manual Quick Start Guide for WISE-7xxx Series Module Version 1.3...