Cleaning The Cyclone Assembly; Cleaning The Hepa Filter Assembly - Xiaomi Dreame V10 Manual

Care & Maintenance

Cleaning the Cyclone Assembly

1. Rotate the cyclone assembly in the direction illustrated to unlock it, then remove the cyclone
assembly.
1
2. Rinse the cyclone assembly with water until it is clean. To thoroughly dry the cyclone
assembly, keep it in a ventilated or cool place for at least 24 hours. Caution: Do not clean the
cyclone assembly in a dishwasher or washing machine, and do not attempt to dry it in a tumble
dryer, oven, microwave, or near an open fire.
3. Once it is dry, reinstall the cyclone assembly.
11
2
12
11 1
10 2
24 hrs
9 3
8 4
7 5
6
Care & Maintenance

Cleaning the HEPA Filter Assembly

1. Place the vacuum securely on a flat surface, then turn the HEPA filter assembly cover in the
direction indicated and remove the HEPA filter assembly.
Note: Remove the built-in foam pad before cleaning the HEPA filter assembly. Rinse the HEPA
filter and foam pad with water.
2
2. Rinse the HEPA filter and foam pad with water. To thoroughly remove all dust caught in
the filter, rotate the HEPA filter by 360 degrees while rinsing. Lightly tap the filter against a
sink several times to remove any excess debris.Keep the HEPA filter in a well-ventilated
and cool place to fully dry.
Note: Fully dry the filter (at least 24 hours) before reinstalling it.
1
3
12
11 1
10 2
24 hrs
9 3
8 4
7 5
6
12