Table of Contents
Advertisement
adequate.
When completed, allow the seal and door to cool before touching them.
Once done, the seal should remain in position.
Electrical information
Warning! This appliance must be earthed.
B
Fig. 15
The mains lead of this appliance has been fitted with a BS 1363A
13Amp fused plug. To change a fuse in this type of plug, follow the
steps below:
1. Remove the fuse cover and fuse.
2. Fit replacement 13A fuse, ASTA approved to BS 1362 type, into the
fuse cover.
3. Replace fuse cover.
Important: Do not use the appliance without the fuse cover in
position.
How to connect an alternative plug
If the fitted plug is not suitable for your socket outlet, then it should
be cut off and disposed of safely to avoid possible shock hazard. A
20
Green and Yellow to Earth
A
Blue to Neutral
Brown to Liv e
13 Amp fuse
Cord Clamp
Advertisement
Table of Contents
