Choosing Not To Integrate; Specifying A Database Storage Directory: Ctrondb (Optional) - Cabletron Systems Network Router User Manual

Installing SPECTRUM for Solstice Enterprise Manager

Choosing Not to Integrate

Specifying a Database Storage Directory:
CTRONDB (optional)
2-14
Second, you will be prompted to re-initialize Solstice Enterprise
Manager to complete the integration process. If you choose to
re-initialize, the integration script will run the em_services -r
command for you immediately, and SPMA will be ready to run. If
you choose not to re-initialize as part of the integration, you must run
the em_services -r command before SPMA can be run
successfully from within Solstice.
If you choose not to integrate SPMA with Solstice Enterprise Manager
at the time of your original installation of the SPMA Þles, you can do
so at a later time, as follows:
1. From any command line, run the following script:
/usr/ctron/install/install
The integration procedure is the same whether you run it at the time
of installation or afterward, and you will be prompted during the
integration to make the same two choices described in the previous
section.
SPMA is now installed, and all necessary environment variables have
been set automatically during the installation; but you can, if you
wish, deÞne the variable CTRONDB to store your SPMA-related
database Þles in other than the default location.
The procedures outlined below specify how this variable might
typically be conÞgured in three commonly-used shells: C shell, Korn
shell, and Bourne shell. If you are using a different shell and/or you
deÞne environment variables in Þles or with commands other than
those speciÞed, simply adjust the commands accordingly. All that
matters is that the necessary variable is correctly deÞned.
Installing SPMA