Installing Spma - Cabletron Systems Network Router User Manual

NOTE

Installing SPMA

NOTE
Installing SPMA
Installing SPECTRUM for Solstice Enterprise Manager
9. Mount the CDROM drive workstation using the following
command:
if you are using a Solaris machine as the CD drive workstation
mount -r -o hard,intr <remote
hostname>:/cdrom/cdrom0 /cdrom
The commands above and below should each be entered as one line.
if you are not using a Solaris machine as the CD workstation
mount -r -o hard,intr <remote hostname>:/cdrom
/cdrom
Follow the procedure below to install the SPMA program and
documentation Þles to your workstationÕs hard drive; during
installation, all necessary subdirectories will be created for you
automatically. The following install procedures cover both the initial
installation and any subsequent product additions or upgrades.
During the install process, you must choose which of the available SPMA
modules you wish to install; the core applications are installed
automatically. If you choose to install additional modules at a later time, the
core files will automatically be re-installed, but you need not re-install any
individual modules you have already installed.
1. To start the installation, type the following command:
if you are running the volume manager daemon (vold process):
/cdrom/cdrom0/install.cd
if you are not running the volume manager daemon:
/cdrom/install.cd
2-7