TYAN Thunder n6550EX Manual page 78

3.5.7.3 Update Firmware
KVM-over-IP Sever Management is a complete standalone computer. The
software it runs is called the firmware. The firmware of KVM-over-IP Sever
Management can be updated remotely in order to install new functionality or
special features. Normally, the factory default firmware is mother board
independent. If you want specified feature, such as monitoring sensors, you
need update firmware.
First, click the button "Browse" and specify the firmware file you want to update.
Then click button "Upload" to transfer the file to KVM-over-IP Sever
Management memory. KVM-over-IP Sever Management will check if this file is
a valid firmware or not.
72
http://www.tyan.com