Check The Accessories; When Replacing The Fuse - Pioneer VREC-170RS Owner's Manual

Check the Accessories

Main Unit×1
Quick Start Guide×1
Note
• All images in this document are for illustrative purpose only and subject to change.

When replacing the fuse

If the product does not power on or charge even when the included cigarette lighter power cable is
connected, then check if the fuse is blown.
CAUTION
If the fuse is blown, then replace this with a new standard glass tube fuse (diam. 5.0 mm/length 20
mm), and tighten the tip fully. Ensure that the fuse is replaced with one of the rated type and capacity
(F 2 AL/250 V).
Suction Mount Cradle
×1
Warranty×1
Twist anticlockwise to remove
Fuse (F 2 AL/250 V)
Connect
to vehicle
cigarette lighter
socket
− 13 −
Cigarette Lighter Power
×1
Cable 3.5 m
Safety Strap×1
When replacing the fuse
Remove
this part
Remove carefully.
These parts are easily lost.