Setting The Lane Departure Detection Speed; Setting The Forward Collision Detection Sensitivity; Setting The Low Speed Forward Collision Detection Sensitivity; Setting Front Vehicle Departure Warning - Thinkware Q800 PRO User Manual

6.4.6 Setting the lane departure detection speed

You can change the lane departure detection speed. Refer to the following instructions to set the lane
departure detection speed.
1
From the mobile viewer, tap Dash Cam Settings
2
From LDWS Speed, select the desired sensitivity. The new setting is applied automatically.

6.4.7 Setting the forward collision detection sensitivity

When the vehicle drives at 30 km/h or above, the FCWS will detect forward collision danger via the realtime
video image and warn the driver. Refer to the following instructions to set the detection sensitivity or
activate or deactivate this feature.
1
From the mobile viewer, tap Dash Cam Settings
2
From FCWS (Forward Collision Warning), select the desired sensitivity. The new setting is applied
automatically.

6.4.8 Setting the low speed forward collision detection sensitivity

When the vehicle drives at 30 km/h or lower, the Low Speed FCWS will detect forward collision danger
via the realtime video image and warn the driver. Refer to the following instructions to set the detection
sensitivity or activate or deactivate this feature.
1
From the mobile viewer, tap Dash Cam Settings
2
From Low Speed FCWS, select the desired sensitivity. The new setting is applied automatically.

6.4.9 Setting front vehicle departure warning

When the vehicle is stopped in traffic, this feature will detect the departure of the vehicle in front and notify
the driver. Refer to the following instructions to enable or disable this feature.
1
From the mobile viewer, tap Dash Cam Settings
2
From FVDW (Front Vehicle Departure Warning), select Enabled or Disabled. The new setting is applied
automatically.
Road Safety Settings.
>
Road Safety Settings.
>
Road Safety Settings.
>
Road Safety Settings.
>
Settings
47