Setting Recording Features; Setting The Continuous Impact Detection Sensitivity; Setting The Super Night Vision Feature; Setting Parking Mode - Thinkware Q800 PRO User Manual

6.3 Setting recording features

You can set and adjust various features for recording, including the detection sensitivity for recording when
the product detects an impact during continuous recording.

6.3.1 Setting the continuous impact detection sensitivity

You can set the detection sensitivity for recording when an impact is detected while driving. When you set
the sensitivity, you must consider the road conditions, traffic situation, and your driving style.
1
From the mobile viewer, tap Dash Cam Settings
2
From Continuous Mode Incident Recording Sensitivity, select the desired sensitivity. The new setting is
applied automatically.

6.3.2 Setting the Super Night Vision feature

You can record bright and high resolution videos while parking at night if you activate the Super Night
Vision feature. Follow the instructions to select a recording mode to use the Super Night Vision feature.
1
From the mobile viewer, tap Dash Cam Settings
2
From Super Night Vision, select the desired recording mode to use the Super Night Vision feature. The
new setting is applied automatically.

6.3.3 Setting parking mode

You can set the operating mode of the product while the vehicle is parked. Follow the instructions to set
parking mode.
To use parking mode, you must install the hardwiring cable (optional). If continuous power is not supplied to
the product, the product will stop recording when the vehicle engine is turned off.
For more information about parking mode, refer to "3.5 Using parking mode"
1
From the mobile viewer, tap Dash Cam Settings
2
From Parking Mode, select the desired parking mode option. The new setting is applied automatically.
Record Settings.
>
Record Settings.
>
Record Settings.
>
Settings
43