Installing The Bagger Top - Toro 79413 Operator's Manual

6

Installing the Bagger Top

Parts needed for this procedure:
2 Grass bag
1 Upper bagger tube
2 Pivot bracket
4 Bolt (5/16 x 1 inch)
4 Nut (5/16 inch)
Procedure
1. Install the bagger top to the bagger frame.
2. Install the pivot brackets onto the pivot frame
(Figure 8).
3. Secure the bagger top to the pivot brackets with
4 bolts (5/16 x 1 inch) and 4 nuts (5/16 inch).
Note:
The bagger top is easier to install if 2
people work together.
1. Bagger posts
2. Bolts (5/16 x 1 inch)
4. Lift the bagger top and install the bags by sliding
the bag frame hooks onto the retaining brackets
(Figure 12).
Figure 11
3. Nuts (5/16 inch)
5. Lower the bagger top onto the bags
6. Attach the bagger hood strap to the latch rod.
7. Install the upper bagger tube by inserting the
curved end into the opening in the bagger top.
Note:
Ensure that the flared end with the
retention post is pointing down and froward in
preparation to be mated with the Finishing Kit.
g300208
9
Figure 12
(Figure
Figure 13
g300378
13).
g033030