Installing The Bagger Top - Toro E-Z Vac 79345 Operator's Manual

9

Installing the Bagger Top

Parts needed for this procedure:
2 Grass Bag
1
Circular cotter pin
Procedure
1. Install the bagger top to the bagger frame.
2. Slide the brackets over the posts in the bagger
frame and install the circular cotter pin into the
hole in the right hand post
3. Rotate the bagger hood down to the operating
position.
Note:
To remove the circular cotter pin,
continue to rotate it in the same direction as
installed.
Figure 20
1. Bagger hood
2. Bagger frame
3. Bracket, bagger hood
(Figure 20).
g016265
4. Circular cotter pin
5. Post
4. Lift the bagger top and install the bags by sliding
the bag frame hooks onto the retaining brackets
(Figure 21).
1. Bag
2. Bagger frame
5. Lower the bagger top onto the bags
6. Secure the hood with the latch
14
Figure 21
3. Retaining bracket
4. Bag frame hook
(Figure
Figure 22
(Figure 22).
g033032
22).
g033030