Table of Contents
Advertisement
Figure 7
1. Self-tapping screw (5/16 x 3/4 inch)
4.
Install the bent, flared end of a rod into the keyed
slot in the left side of the machine frame, and
move the rod rearward to seat it in the frame
(Figure
8).
Note:
Repeat this step for the right side of the
machine.
Figure 8
5.
Insert the bent ends of the rods into the
attachment mount as shown in
secure the end of each rod with a washer and
hairpin cotter.
Installing the Latch Rod
Parts needed for this procedure:
Procedure
Install the latch rod with a hairpin cotter
g300206
1. Hairpin cotter
g300207
Figure 8
and
7
4
1
Latch rod
1
Hairpin cotter
Figure 9
(Figure
9).
g202360
2. Latch rod
Advertisement
Table of Contents
