Connecting With The Discharge Tube - Toro 79413 Operator's Manual

Figure 18
1. Carriage bolt
6. Secure the chute to the mower deck with the
hand knob (Figure
Figure 19
7. Hand tighten the knob to secure the chute to the
mower deck (Figure
8. Hook the flexible latch on the chute to the
retaining clasp welded to the side wall of the
mower deck (Figure
2. Nut
19).
19).
20).
g300214
1. Retaining clasp
8
Connecting with the
Discharge Tube
Parts needed for this procedure:
1 Discharge tube
Procedure
1. Slide the curved end of the discharge tube into
the opening in the bagger top
g300215
11
Figure 20
2. Flexible latch
(Figure 21).
g013098