Installing The Latch Rod - Toro E-Z Vac 79345 Operator's Manual

Figure 17
Left side shown
1. Pivot frame hole
2. Washer
3. Hairpin cotter
8. Insert the bent ends of the rods into the
attachment mount as shown in
secure the end of each rod with a washer and
hairpin cotter.
g028306
4. Support rod
5. Keyed slot (existing)
6. Bent, flared end of the rod
Figure 17 and
7

Installing the Latch Rod

Parts needed for this procedure:
1 Latch rod
1 Hairpin cotter
Procedure
Install the latch rod with a hairpin cotter
1. Hairpin cotter
12
(Figure
Figure 18
2. Latch rod
18).
g201213