Sage FoodCycler SWR550 Quick Manual page 18

3. Remove the packaging from the filters
before fitting. Keeping the new filters
straight, insert the right, then the left, into
the filter cavities and twist clockwise to
secure.
4. Slide the filter air guides over the top of
the filters so they sit straight. Push down
slightly to fit.
5. Locate the filter reset button along the
upper, inner lip of the filter cavity and
press and hold for 3 seconds. The
'Change Filter' light will turn off when it is
reset. Replace the back panel.
18
IMPORTANT
On first use, remove the filters as described
above and remove the filters stickers. If the
'Change Filter' light is not illuminated, do not
reset.
REPLACEMENT FILTERS
Replacement filters may be purchased from
the Sage website† or at participating retail
outlets.
Sage
FoodCycler™
Model No
SWR550GRY
†Delivery charges may apply.
Please contact Sage Customer Service
Centre for further support.
Only use the original Sage filter specially
intended for this appliance. Do not use any
other filter.
Filter Replacement
Product Code
SWR050BLK