Nylon Line Head Disassembly Instructions; Nylon Line Replacement - Echo SRM-2620U Operator's Manual

MAINTENANCE

Nylon Line Head Disassembly Instructions

Note: For normal use, Speed Feed® head disassembly is not
necessary. However, if circumstances require disassembly,
follow these instructions.
1. Press top of locking tabs (A) on
both sides of Speed Feed® head
to release cover (B) from eyelet
carrier (C).
2. Remove cover from eyelet
carrier.

Nylon Line Replacement

Wear Gloves or personal injury may result:
Cutoff knife is sharp.
◆
Gearcase and surrounding area may be hot.
◆
1. Cut one piece of line to
recommended length.
2.0 mm (.080) diam. – 6 m (20 ft.)
2.4 mm (.095) diam. – 6 m (20 ft.)
2. Align arrows on top of knob with
openings in eyelets.
42
SRM-2620U
A
B
C
X7502341900
© 10/2016 ECHO Inc.