1. Manuals
  2. Brands
  3. Echo Manuals
  4. Trimmer
  5. SRM-260 - 12-00
  6. Operator's manual

Echo SRM-260 - 12-00 Operator's Manual

Serial number 04001001 - 04999999
Hide thumbs
Table of Contents

Advertisement

Quick Links

Grass Trimmer/Brush Cutter
Operator's Manual
MODELS,
Read rules for safe operation and instructions carefully. ECHO provides an
Operator's Manual and a Safety Manual. Both must be read and understood for
proper and safe operation. Failure to do so could result in serous injury.
X7502096100
SRM - 260
SRM - 260S

Serial Number 04001001 - 04999999

WARNING
DANGER
X750002010
12/00

Advertisement

Table of Contents
loading

Related Manuals for Echo SRM-260 - 12-00

Summary of Contents for Echo SRM-260 - 12-00

  • Page 1: Serial Number

    Serial Number 04001001 - 04999999 WARNING DANGER Read rules for safe operation and instructions carefully. ECHO provides an Operator's Manual and a Safety Manual. Both must be read and understood for proper and safe operation. Failure to do so could result in serous injury.

  • Page 2: Table Of Contents

    NTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the- job-dependability. Read and understand this manual and the SAFETY MANUAL you found in the same package. You will find both easy to use and full of helpful operating tips and SAFETY messages.

  • Page 3: Manual Safety Symbols And Important Information

    Make sure the decals are legible and that you understand and follow the instructions on them. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information.

  • Page 4: International Symbols

    • Beware of KICKOUT (blade thrust) when using blades. Special precautions are necessary for blade operation, see your Operator's and Safety Manuals. ONLY install ECHO approved blades on Brush Cutters (SRM) models equipped with proper blade shield, U-handles, harness, blade collar, nut and cotter pin.

  • Page 5: Equipment

    Read and comply with all safety instructions listed in this manual and safety manual. • ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO.

  • Page 6: Fuel

    IMPORTANT Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut-off containers to reduce fuel spillage. Contact your ECHO dealer for ordering information. After Refueling; • Wipe any spilled fuel from the unit.

  • Page 7: Physical Condition

    Trimmer/Brush Cutter handles. Gloves also reduce the transmission of machine vibration to your hands. Hearing Protection -- ECHO recommends wearing hearing protection whenever unit is used. Proper Clothing -- Wear snug fitting, durable clothing; • Pants should have long legs, shirts with long sleeves.

  • Page 8: Safe Operation

    SAFE OPERATION Determine Operation Area • Provide all operators of this equipment with the Operator's Manual and instructions for safe operation. 15 m (50 ft.) • Review the area to be trimmed. Look for hazards that could contribute to unsafe conditions. •...

  • Page 9: Extended Operation/Extreme Conditions

    RASS RIMMER RUSH UTTER PERATOR ANUAL EXTENDED OPERATION EXTREME CONDITIONS Vibration and Cold It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of certain individuals may be brought about by exposure to vibration and cold. Exposure to vibration and cold may cause tingling and burning sensations followed by loss of color and numbness in the fingers.

  • Page 10: Description

    The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, shield installation and other assembly may be necessary. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.
  • Page 11 RASS RIMMER RUSH UTTER PERATOR ANUAL...
  • Page 12 21. SAFETY VIDEO - (Not included with unit) P/N 99922202540 English version only is available at a cost of $5.00 from ECHO, INC. or any authorized ECHO dealer. The video overviews safety precautions and proper operating tech- niques and is supplemental to the Safety Manual. Read and understand the Safety Manual for complete information...

  • Page 13: Specifications

    RASS RIMMER RUSH UTTER PERATOR ANUAL PECIFICATIONS i t i ) l i . t i . l f i l - ™ , t i * Install and use U-Handle when operating any model with blade.

  • Page 14: Assembly

    SSEMBLY PLASTIC SHIELD INSTALLATION (for Nylon Line Operation) Tools Required: Screwdriver. Parts Required: Plastic Shield, Shield Plate, three (3) 5mm x 15mm screws. NOTE The plastic shield is for use with the Nylon Line Head only. Install Metal Shield when using plastic or metal blades. Remove plastic threaded shaft sleeve and adapter plate (C) from PTO shaft (A).

  • Page 15: Accessory Installation

    RASS RIMMER RUSH UTTER PERATOR ANUAL ACCESSORY INSTALLATION Blade Conversion Kit P/N 99944200415, U-Handle / Blade Conversion Kit P/N 99944200521. NOTE Refer to Operation with Blades page 19 for correct Accessory / Blade equipment requirements. WARNING DANGER You must install a U-Handle/Blade Conversion Kit before operating this unit using metal blades, otherwise serious injury may result.

  • Page 16: Metal Shield Installation

    METAL SHIELD INSTALLATION Tools Required: 8mm x 10mm Open End Wrench, Screwdriver. Parts Required: Metal Shield, Bracket, 3 - 5mm x 15mm screws w/captivated flat and lockwasher (metal shield to gear housing), 2 - 5mm x 8mm screws, 4 - 5mm nuts, 4 - 5mm lockwashers (bracket to shield and bracket to gear housing).
  • Page 17 RASS RIMMER RUSH UTTER PERATOR ANUAL Loosen bolt (E) and pull drive shaft assembly from clutch case. Loosen two (2) rear handle screws (F) and pull rear handle (G) from the drive shaft assembly. Loosen four (4) screws (H) and remove front handle. 400 mm (15-3/4 in.) Position lower U-Handle bracket (J) 400mm (15-3/4 in.) from engine end of drive shaft.
  • Page 18 14. Attach inner cable to swivel (C). Check throttle for freedom of movement and that wide open throttle / low idle extremes are adjusted properly. If adjustment cannot be achieved with adjusting nuts, consult with your Echo Dealer for correct adjustment procedure. 15. Connect ignition leads (A) and (B).

  • Page 19: Pre-Operation

    RASS RIMMER RUSH UTTER PERATOR ANUAL PERATION OPERATION WITH BLADES Preparing the Trimmer/Brush Cutter for Blade Use WARNING DANGER Blade use DEMANDS specific Brush Cutter configuration. Operation without specified shield and harness can result in serious personal injury. Plastic and Nylon Blades Require "Blade Conversion Kit," P/N 99944200415 (TRI-CUT [A] and shoulder harness [B]) or U-Handle/Blade Conversion Kit P/N 99944200521 (metal blade [C] and shoulder harness [B]).
  • Page 20 Plastic/Nylon Blades may be used where ever the nylon line head is used. DO NOT use this blade for heavy weeds or brush! Blade Conversion Kit P/N 99944200415 is required for use with Nylon Blades. 8 Tooth Weed/Grass Blade (P/N 69600120331) is designed for grass, garden debris and thick weeds.

  • Page 21: Fuel

    EPA Emission Defect Warranty Explanation.) IMPORTANT Echo Premium 2-Stroke Oil may be mixed at 50:1 ratio for application in all Echo engines sold in the past regardless of ratio specified in those manuals. Mixing Instructions Fill an approved fuel container with half of the required amount of gasoline.
  • Page 22 IMPORTANT Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut-off containers to reduce fuel spillage. Contact your ECHO dealer for ordering information. After Refueling; • Wipe any spilled fuel from the unit.

  • Page 23: Equipment Check

    RASS RIMMER RUSH UTTER PERATOR ANUAL EQUIPMENT CHECK Before operation a complete check of the unit must be performed; • Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed. • Inspect fuel lines, tank and area around carburetor for fuel leaks. DO NOT operate unit if leaks are found.

  • Page 24: Operation

    DANGER The cutting attachment should not rotate at idle. If attachment rotates, readjust carburetor according to "Carburetor Adjustment" instructions in this manual or see your ECHO Dealer, otherwise serious personal injury may result. Stop Switch - Start/Run. Move stop switch button (A) forward away from the STOP position.

  • Page 25: Starting Warm Engine

    RASS RIMMER RUSH UTTER PERATOR ANUAL Primer - Pump Bulb. Pump primer bulb (C) until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional 4 or 5 times. Start - Pull Rope. Lay the trimmer on a flat clear area and pull the recoil starter handle (D) until engine fires.

  • Page 26: Stopping Engine

    ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded. If the task is not listed, see your ECHO Dealer for repairs.

  • Page 27: Maintenance Intervals

    RASS RIMMER RUSH UTTER PERATOR ANUAL MAINTENANCE INTERVALS i l y t r o s n I - t I f l e l i F r e t s n I s n I l i F r e t s n I s n I i l o...

  • Page 28: Air Filter

    AIR FILTER Level 1. Tools required: Cleaning brush, 25 or 50 mm (1 or 2 in.) medium bristle paint brush. Parts required: 90030 REPOWER AIR & FUEL FILTER KIT. Close choke (Cold Start Position). This prevents dirt from entering the carburetor throat when the air filter is removed. Brush accumulated dirt from the air cleaner area.

  • Page 29: Spark Plug

    RASS RIMMER RUSH UTTER PERATOR ANUAL WARNING DANGER Do not perform maintenance on the muffler until engine and muffler are completely cool, otherwise serious personal injury may occur. SPARK PLUG Level 2. Tools Required: T-Wrench (combination socket wrench & screw driver supplied with unit) Feeler gauge, preferably a wire gauge.

  • Page 30: Exhaust System

    Remove spark plug lead. Remove two (2) muffler cover screws and muffler cover (A). Remove screw and arm rest (B). Remove engine cover (C). IMPORTANT DO NOT use a metal scraper to remove dirt from the cylinder fins. 5. Use brush to remove dirt from the cylinder fins. 6.

  • Page 31: Carburetor Adjustment

    The cylinder exhaust port must be inspected and cleaned of excess carbon every 3 months or 90 hours of operation in order to maintain this engine within the emissions durability period. ECHO strongly recommends that you return your unit to your ECHO dealer for this important maintenance service. CARBURETOR ADJUSTMENT...

  • Page 32: Lubrication

    When carburetor adjustment is completed, the cutting attachment should not turn at idle, otherwise serious personal injury may result. LUBRICATION Level 1. Tools Required: 8 mm Open End Wrench, Screwdriver, Clean Rag. Parts Required: ECHO LUBE 8 oz. (P/N 91014) or Lithium Base ® Grease. Gear Housing Clean all loose debris from gear box.

  • Page 33: Nylon Line Replacement

    Level 1. Tools Required: Head locking tool (if head is to be removed) Parts Required: ECHO 0.095" Nylon Trimmer Line 12 m (40 feet) long. 1. Hold drum (A) and turn spool (B) CW (clockwise) until it stops. Pull spool from drum. DO NOT push in on spool when turning.

  • Page 34: Sharpening Metal Blades

    SHARPENING METAL BLADES Three styles of metal blades are approved for use on the ECHO Brush Cutter. The 8-tooth blade can be sharpened during normal maintenance. The clearing blade and 80 tooth blade require professional service. Before sharpening, CLOSELY inspect blade for cracks (look at the bottom of each tooth and the center mounting hole closely), missing teeth and bending.

  • Page 35: Troubleshooting

    RASS RIMMER RUSH UTTER PERATOR ANUAL ROUBLESHOOTING l f f t l i f t n I t l i f t l i f WARNING DANGER Fuel vapors are extremely flammable and may cause fire and/or explosion. Never test for ignition spark near an open spark plug opening, otherwise serious personal injury may result.

  • Page 36: Storage

    TORAGE Long Term Storage (over 30 days) WARNING DANGER During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may result.
  • Page 37 RASS RIMMER RUSH UTTER PERATOR ANUAL NOTES...
  • Page 38 NOTES...
  • Page 39 RASS RIMMER RUSH UTTER PERATOR ANUAL NOTES...

  • Page 40: Servicing Information

    • Purchasing from your Echo Dealer. • Sending a check or money order for $2.00 per Parts Catalog or $1.50 per Operator's Manual made payable to ECHO, INCORPORATED. State on a sheet of paper the model number and serial number of the ECHO unit you have, part number of the manual (if known), your name and address and mail to address above.

This manual is also suitable for:

Srm-260s - 12-00Srm-260Srm-260s

Table of Contents