Table of Contents
Advertisement
Automatic volume control
(depending on the base)
Crescendo is not set for the ringtone volume (
The phone is able to automatically adjust the volume of the receiver and ringtone to the
ambient volume. Here you can set the sensitivity with which the phone reacts to changes in
noise level (Very High, High, Medium, Low, Very Low).
. . . Use
Earpiece Volume / Ringtone Volume
Enable/disable:
Adjust the sensor:
Save:
Headset – volume correction
Change the call volume for the wired headset. In addition to the standard settings for the call
volumes, here you can compensate the audio setting characteristics of your headset.
. . . Use
to set the volume
Microphone sensitivity
Adjust the sensitivity of the microphone for the receiver or wired headset. This gives you
improved acoustics in loud environments and when there are echoes.
. . . Use
select what the setting applies for (Earpiece / Corded headset)
sensitivity
Save
Earpiece and handsfree profile
Select a profile for the earpiece and handsfree mode in order to adapt the telephone as much
as possible to the surroundings. Check which is the most comfortable profile for you and your
caller.
. . . use
Earpiece Profiles / Handsfree Profiles
Select (
= selected)
Earpiece Profiles: High frequency or Low frequency (default setting)
Handsfree Profiles: Standard (default setting) or Reduced Echo
to select
Audio Settings
Activation: Use
Sensitivity
Save
to select
Audio Settings
Save
to select
Audio Settings
to select
Audio Settings
Availability and operation of the functions
may differ on your telephone.
p. 50).
OK
Smart Volume
Edit
to select On or Off
Use
to adjust the sensor sensitivity
OK
Corded Hdst Boost
OK
Mic Sensitivity
OK
Acoustic Profiles
OK
use
to select profile
Setting the handset
OK
Use
OK
Use
Use
to adjust the
to
49
Advertisement
Table of Contents
