S921 OWNER’S MANUAL CONTENTS 1. INTRODUCTION ................2 2. SAFETY PRECAUTIONS ..............3. LIST OF PARTS ................. 4. ASSEMBLE THE PRODUCT ............. STEP 1 Install the Main Frame .............. STEP 2 Install the Belt ................STEP 3 Install the Seat Cushion ............STEP 4 Install the Weight Stack Covers ..........
1. INTRODUCTION Congratulations on the purchase of a high quality SportsArt product, the S921 Mid Row machine. Constructed of high quality materials and designed for years of reliable performance, this product was made for full commercial use. Before this product is assembled or operated, we recommend that you familiarize yourself with this manual.
2. SAFETY PRECAUTIONS This product was designed and built for optimum safety. However certain precautions apply during the use of this product. Please note the following safety precautions: • Please read the entire manual before assembly and operation. Make sure the product is installed and operated as instructed in this manual. •...
3. LIST OF PARTS Assembly Parts No. Name Qty. No. Name Qty. A1 Weight Stack Frame A6 80 Oval Foot Cover A A2 Seat Frame A7 80 Oval Foot Cover B A3 Seat Cushion A8 118 Oval Foot Cover A A4 Weight Stack Front Cover 1 A9 118 Oval Foot Cover B A5 Weight Stack Back Cover 1...
Page 6
Components in the Hardware Kit Name Qty. Specification Notes Push revits L-shaped Allen wrench L-shaped Allen wrench Double open-end wrench 8*17 Double open-end wrench 8*10 Double open-end wrench 12*15 Double open-end wrench 13.2*15.2 Double open-end wrench 17*23 Components on the Product Name Specification Notes...
4. ASSEMBLE THE PRODUCT Follow instructions below to assemble this product. Note that in this manual the words “left” and “right” are used to refer to the product and its parts. As such, these designations correspond to the “left” and “right” sides of a person in position to exercise on this product.
STEP 2 Install the Belt (a). In area A, please remove the pulley from its housing. Attach the belt onto the pulley then secure the assembly with screws. (b). Remove the pin (21) from the fixed pulley on the bottle of the seat frame (A2), adjust the belt before securing the pin (21).
STEP 3 Install the Seat Cushion (a). Remove screws (22) from the seat frame (A2), then remove screws (23) from the seat cushion (A3). (b). Attach the seat plate onto the seat frame (A2), then use screws (22) to secure the assembly. (c).
STEP 4 Install the Weight Stack Covers (a). Attach both front and back weight stack covers (A4)(A5) onto the weight stack frame (A1). (Note: before the attaching the front weight stack cover (A4), make sure the inside hanger is hooked to the frame before securing it to the weight stack frame.) (b).
STEP 5 Install the Storage Tray Holder Please follow the instructions (a) through (b) to install the storage tray (a). Locate the position where the storage tray (A10) attaches to the weight stack frame (A1), then remove the screws (24) from the weight stack frame. (b).
STEP 6 Seat Adjustment Instructions * When adjusting the seat height, pull the seat lever to adjusted to the desired height and then release the seat lever. * If the machine has not been used for a long time or the seat is adjusting slowly.
STEP 7 Belt Tension Adjustment Instructions 1. After the installation and the final positioning of the machine, make the appropriate adjustments to ensure that the machine is working. 2. If the belt is too tight or too loose, first loosen nut A as shown then adjust nut B.
5. MAINTENANCE This section covers maintenance topics and includes a maintenance schedule, task list, and log. MAINTENANCE Machine Maintenance 1. Please clean and lubricate the guide rod once a week. (a). Use a clean, lint-free towel to apply the lubricant onto the guide rods. (b).
Page 15
MAINTENANCE Machine Maintenance IMPORTANT NOTE 1. Once the machine belt reaches the warranty period, it is recommended to replace the belt. 2. Belt safety check, after a year in use, check belt weekly. Depend on the use conditions, increase the frequency of inspections. (As shown: (A) a belt, (B) the belt extension) During inspection, if found cracks in the belt or the belt is exposed to other unusual circumstances, please immediately stop using the machine and...
MAINTENANCE Schedule Area Week Month Quarter Year Notes Exterior Clean. Screws Inspect for looseness and secure if necessary. Testing To confirm that the machine is working properly Cushions Wipe with a damp cloth. Belt Check for damage or wear. If so, need for replacement.
MAINTENANCE Task List Like cars, fitness products require maintenance. Regular maintenance ex- tends product life, and failure to maintain products can void the manufac- turer’s warranty. Copy the maintenance log sheet, and record maintenance work for each fitness product. Daily tasks 1.
6. CONSIGNES DE SÉCURITÉ IMPORTANTES Le produit SportsArt a été conçu et fabriqué afin d’assurer une sécurité optimale. Cependant certaines précautions s’appliquent chaque fois que vous utilisez votre produit. • Lisez entièrement le manuel avant l’assemblage et l’utilisation. Veuillez aussi noter les consignes de sécurité...