Device Description; Delivery, Unpacking And Accessories - Omega FMG70B Series User Manual

1

Device description

The FMG70B series from Omega, is a non-contact flow sensor. The measurement is
performed using magnetic induction and works without any moving parts.
The FMG70B is used for measuring or metering water and aqueous solutions. The compact
design and independence from the intake and discharge sections allows the FMG70B to be
used under a variety of conditions.
∗
Versions :
The FMG70B is available with inner diameters 0.39 in
narrows to 0.16 in, 0.39 in and 0.79 in.
The versions can be configured differently ( FMG70B
data sheet).
Type plate:
The type plate sticker is located at the bottom side of
the FMG70B.
It contains the most important data, the connection
diagram and the arrow for the flow direction (Example
 Fig.).

1.1 Delivery, unpacking and accessories

All units have been carefully checked for their operational reliability before shipment.
 Immediately after receipt, please check the outer packaging for damages or any signs of
improper handling.
 Report any possible damages to the forwarder and your responsible sales
representative. In such a case, state a description of the defect, the type and the serial
number of the device.
Report any in-transit damage immediately. Damage reported at a later date shall not be
recognized.
Unpacking:
 Carefully unpack the unit to prevent any damage.
 Check the completeness of the delivery based on the delivery note.
Scope of delivery:
 1x FMG70B as ordered.
 1x Operating manual.
 1x Packing.
∗
Customised versions available on request.
Technical changes reserved
Device description
- 5 -