Related Manuals for Omega FP-5070 Series
Summary of Contents for Omega FP-5070 Series
- Page 1 User’s Guide Shop online at omega.com e-mail: info@omega.com For latest product manuals: www.omegamanual.info FP-5070 SERIES Flow Sensors...
- Page 2 Fax: (203) 359-7700 e-mail: info@omega.com For Other Locations Visit omega.com/worldwide The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.
-
Page 3: Safety Instructions
1. Description Cable plug Upper body with electronic switch The FP-5070 Series Mini Flow Sensors contain a free-running rotor which is driven by the fluid flow. Within the given 25 ft cable measurement range, the rotational speed of the rotor is proportional to the fluid flow rate. -
Page 4: Installation
Disregard ground symbol on connector Installation Hints • Avoid vibrations and shocks. • Avoid solids in the fluid. Max cable length: 300 m (1000 ft) • Install a filter or line strainer upstream to protect sensor. Omega FP-5070 Series Flow Sensors... - Page 5 #3-2507.080-2 Quad ring seal, #3-2507.080-3 FLOW Flow inserts: 2 mm: #3-2507.081-2 3 mm: #3-2507.081-3 Lower Body, 4 mm: #3-2507.081-4 3-2507.080-4x (x = size of flow insert) (Example: Lower Body with 2 mm insert = 3-2507.080-42) Omega FP-5070 Series Flow Sensors...
-
Page 6: Ordering Information
Red (Signal IN) and Shield terminals. A square wave signal should appear at these terminals. If no signal is present, replace sensor. 8. Ordering Information Mfr. Part No. Description FP-5072-PV Mini-Flow Sensor, 2 mm insert FP-5074-PV Mini-Flow Sensor, 4 mm insert FP-5076-PV Mini-Flow Sensor, 6 mm inlet, no insert Omega FP-5070 Series Flow Sensors... - Page 7 Department will issue an Authorized Return (AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no charge. OMEGA’s WARRANTY does not apply to defects resulting from any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or unauthorized modification.
- Page 8 Where Do I Find Everything I Need for Process Measurement and Control? OMEGA…Of Course! Shop online at omega.com TEMPERATURE M U Thermocouple, RTD & Thermistor Probes, Connectors, Panels & Assemblies M U Wire: Thermocouple, RTD & Thermistor M U Calibrators & Ice Point References M U Recorders, Controllers &...