Maintenance And Cleaning; Return Shipment To The Manufacturer - Omega FMG70B Series User Manual

7

Maintenance and cleaning

Maintenance:
The FMG70B is maintenance-free and cannot be repaired by the user. In case of a defect,
the device must be replaced or sent back the manufacturer for repair.
CAUTION! Material damage!
When opening the device, critical parts or components can be damage.
 Never open the device and perform any repair yourself.
Cleaning:
Clean the FMG70B with a dry or slightly damp lint-free cloth. Do not use sharp objects or
aggressive agents for cleaning.

7.1 Return shipment to the manufacturer

Due to legal requirements placed on environmental protection and occupational safety and
health and to maintain the health and safety of our employees, all units returned to Omega
for repair must be free of toxins and hazardous substances. That also applies to cavities in
the devices. If necessary, the customer must neutralize or purge the unit before return to
Omega.
Costs incurred due to inadequate cleaning of the device and possible costs for disposal
and/or personal injuries will be billed to the operating company.
WARNING! Risk of injury due to insufficient cleaning!
The operating company is responsible for all damages and harm of any kind, in particular
physical injuries (e.g. caustic burns or toxic contaminations), decontamination measures,
disposal etc. that can be attributed to insufficient cleaning of the measuring instrument.
 Please follow the instructions for sending in returns shown on page 23 of this manual.
The following measures must be taken before you send the unit to Omega for repair:
 Clean the device thoroughly. This is of extreme importance if the medium is hazardous to
health, i.e. caustic, toxic, carcinogenic or radioactive etc.
 Remove all residues of the media and pay special attention to sealing grooves and slits.
 Attach a note describing the malfunction, state the application field and the
chemical/physical properties of the media.
 Please specify a point of contact in case our service department has any questions.
Technical changes reserved
Maintenance and cleaning
- 15 -