Tools For Removal And Reassembly - Samsung DW60M6050 Series Repair Manual

1. TOOLS FOR REMOVAL AND REASSEMBLY

Tool image
No.
①
Adjustable Wrench
②
Open-end Wrench
③
Vice Pliers
Others
④
(screwdriver, nipper, long nose pliers)
⑤
Ear clamping tool
NOTE :
Preparation for parts replacement
1. Take out the residual water inside the product. (Drain the water by operating the drain pump)
2. Close the water supply valve.
3. Turn off the power & disconnect power cable.
You must turn off the circuit breaker connected to the product.
4. Pull out the unit from the sink and lay it on the floor.
Be careful of the drain hose when pulling out the unit.
Tool Type
1-7/16"
Remarks
Common tools for servicing
Screwdriver – Phillip, Flat, Torx T15
In reassembling of the clamp-bend(ear clamp) using our
SVC part, this tool is needed.
Tools For Removal And Reassembly _ 3