Table of Contents
Advertisement
G
LOSSARY TERMS
Term
SCS
Software Communication Specification
CSV
Comma Separated Values
TB
Terminal Block
UM
User Manual
C
OMMUNICATION
COM
PORTS
PROTEUS provides 3 x serial ports for communication with the external devices:
COM PORT
COM1
COM2
COM3
COM
:
PORTS
BAUD RATES
COM1 & COM2 are fixed for N, 8, 1. However, baud rates can be set to
•
COM3 is USB Device CDC-ACM class. It allows a USB host (PC) to communicate with the device (Proteus) as a serial device.
•
There is no baud rate associated with this interface and transfer speed of 1.7 Mbit/s to 4.1Mbit/s can be achieved.
COM
:
PORTS
DEVICE TYPES
COM1-2 ports can be interfaced to various sensors. Table below shows a few examples and their corresponding Device Type setting.
Attach Sensor/Device
Any device transmitting CSV sentences i.e. GPS, IMU, laptop, etc.
All NMEA-0183 compatible devices i.e. GPS Modem, Sounder, etc.
Serial Terminal program such as PuTTY, Tera Terminal, etc.
Vector NAV IMU
General Dynamic CINEFLEX
Location
RS232:
Rear Panel DB9
RS232:
Internal J54 & J16
Mini-USB:
Front panel
Definition
Pin assignments
2=RX, 3=TX, 5=GND
J54:
1=RX, 2=GND, 3=TX
Standard USB Device
4800, 9600, 19200, 38400, 57600,115200,230400,460800.
Corresponding Device Type setting
CSV1, CSV2, CSV3, CSV4, SSV3, SSV4 (See
CSV1, CSV2, CSV3, CSV4, SSV3, SSV4
CSV1, CSV2, CSV3, CSV4, SSV3, SSV4
VectorNav
CINEFLEX
6
CSV formats
for more detail)
Advertisement
Table of Contents
