Proteus Commands; Transmit A Command Script - VideoLogic Proteus-V User Manual

PROTEUS
COMMANDS
Aside from supporting various connected devices, PROTEUS provides over 30 powerful commands to overlay crisp and clear texts, graphics and
telemetry generated information into an incoming HD & SD video in real time. Refer to the Software Communication Spec (SCS) for the detail
description of each command.
T C
RANSMIT A OMMAND
1. Connect PROTEUS to your monitor. Connect RS232 cable from your PC to the PROTEUS. Power on PROTEUS.
2. Run PROTEUSApp located in folder C:\VideoLogix-V\utility.
3. Use File, Select Com Port
4. Go to "Demo/Tutorial" tab.
5. Click Run Script Now button and load C:\VideoLogix-V\Script\0-TestCommands.
6. A demo should appear on your video monitor.
S
CRIPT
to assign a com port.
52