Table of Contents
Advertisement
B. Main menu and Installation
Main Menu
Press the MENU key to display the "Main Menu" o
n the screen.
Select a sub-menu using the , keys or the numeric k
eys. Please note that the OK key is always a confirma
tion of your selection. To go back to the previous me
nu, press the MENU key.
Installation
Installation Lock
Enter PIN Code
The Installation Lock "Enter PIN code" menu is displayed only when the Installation and Edit Lock is se
t as [ON]. The initial code is set as [0000] but you can change it (See "Change PIN code" on page 20).
Program Satellites
Refer to the Signal Quality bar and the Signal Lev
el bar at the bottom of the screen. It is recommend
ed that the signal is at the Medium level or higher.
If it is not , please adjust your satellite dish.
This menu is to align your dish to the selected satellite.
If you set the "Polarity Control" parameter in the "LNB
Setting" menu as "Polarotor" or "Ferrite", you can adjust
the "Skew" parameter in this menu while you are watchi
ng the signal level at the same time.
You can move the dish using the , keys when the "Position" option is selected. . To locate a satellite move the
dish until you have the location of the satellite at which the best signal quality is achieved. Press the OK key wh
ile still on the "Position" option to store the position. The stored locations for each satellite are shown above the
Signal Level bar.
If you are unable to get any signal quality, please check the LNB Setting to ensure you have selected the correct
LNB and switch settings.
In some cases it might be necessary to reposition all satellites at once. This can be achieved with the "Re-align di
sh"option.
[ ? ? ? ?]
Main Menu
1
2
3
4
5
6
6
7
8
Conditional Access
I
Installation
1
2
User's Setting
3
4
LNB Setting
5
Motorized Dish Setting
6
Advanced Installation
i
Program Satellite
1
2
3
4
5
6
7
8
EL
i
18
TV Channels
Radio Channels
Parental Control
VCR Timer
Edit
Installation
Select Satellite
Program Satellites
SMATV Configuration
Satellite
028.2° E
ASTRA2
LNB Type
TP/Pol/SR(Digital)
11478/H/30000
Skew
Not set
Position
E
Re-align dish
Search type
Auto Search
[ E 1172 W ]
Start Search(Press OK)
Signal Level
Signal Quality
Exit
Exit
Type1
1172
W
+00
WL
12%
00%
Advertisement
Table of Contents
