Hand-Over To The User; Technical Data; Piping Diagram: Indoor Unit - Daikin Altherma EHVZ-CB3V Installation Manual

Table of Contents

Advertisement

NOTICE
To perform an underfloor heating screed dryout, room frost
protection needs to be disabled ([2‑06]=0). By default, it is
enabled ([2‑06]=1). However, due to the "installer-on-site"
mode (see "Checklist before commissioning"), room frost
protection will be automatically disabled for 36 hours after
the first power-on.
If the screed dryout still needs to be performed after the
first 36 hours of power-on, manually disable room frost
protection by setting [2‑06] to "0", and KEEP it disabled
until the screed dryout has finished. Ignoring this notice will
result in cracking of the screed.
NOTICE
For the underfloor heating screed dryout to be able to start,
make sure the following settings are met:
▪ [4‑00]=1
▪ [C‑02]=0
▪ [D‑01]=0
▪ [4‑08]=0
▪ [4‑01]≠1
8

Technical data

A subset of the latest technical data is available on the regional Daikin website (publicly accessible). The full set of latest technical data is
available on the Daikin extranet (authentication required).
8.1

Piping diagram: Indoor unit

Water side
Field installed
1
8
5
6
Field installed
2
7
4
7
3
8
1
Space heating – water OUT (additional/direct zone)
EHVZ04~16S18CB3V
Daikin Altherma – Low temperature split
4P401672-1E – 2018.02
A
10
M
27
12
29
28
15
13
7

Hand-over to the user

Once the test run is finished and the unit operates properly, please
make sure the following is clear for the user:
▪ Fill in the installer setting table (in the operation manual) with the
actual settings.
▪ Make sure that the user has the printed documentation and ask
him/her to keep it for future reference. Inform the user that he can
find the complete documentation on the url as earlier described in
this manual.
▪ Explain the user how to properly operate the system and what to
do in case of problems.
▪ Show the user what to do in relation to maintaining the unit.
▪ Explain the user about energy saving tips as described in the
operation manual.
20
16
9
R2T
23
R5T
17
26
14
28
11
24
M
R7T
A
7 Hand-over to the user
Refrigerant side
19
R1T
Refrigerant inlet
18
22
21
R4T
R3T
Refrigerant outlet
3D096028-1A
Installation manual
21

Advertisement

Table of Contents
loading

Table of Contents