Final Assembly (Continued) - ECR EMI America Series Installation, Operation And Maintenance Manual

Connect vane motor plug into
Figure 23
socket on chassis
female vane motor plug on
chassis
Male vane motor plug on fascia
Connect infrared unit cable ("H"
Figure 24
units only)
red stripe is
Conductor #1
Comfort where it counts
CACG/CAHG & CACH/CAHH
• Installation, Operation and Maintenance Manual •
Final Assembly
Figure 25
Figure 26
Polarized
10 Position
Connector
20
Air Handlers
(continued)
Secure fascia to chassis
CAUTION
DO NOT over-tight-
en the bolts — This
could cause damage
to the fascia and drain
pan.
Adjust louver position to 30°
from plumb
P/N 240007756, Rev. A [051509]