Table of Contents
Advertisement
Quick Links
INSTALLATION MANUAL
Level of Difficulty
Easy
Weight Capacity
Gross trailer weight (GTW)
Tongue weight (TW)
Ball Capacity
2" ball
2-5/16" ball
Parts List
Item Qty Description
1
1
Adjustable shank*
2
1
Dual ball
3
2
Pin*
4
2
Clip*
*Sold separately
Tools Required
None
Maintenance
Mild automotive detergent may be used to
clean the product. Do not use dish detergent,
abrasive cleaners, abrasive pads, wire
brushes or other similar products that
may damage the finish.
CURTMFG.COM
•
NEED ASSISTANCE?
WARNING
Never exceed the vehicle manufacturer's recommended towing capacity. The ratings of
the mount system are intended to represent the capability of the product and in no way
reflect the ratings or capacity of the towing system it is being used with. The consumer
or operator are strongly advised to learn the ratings of the various components of the
towing system and never exceed the limits of the lowest rated component being used.
15,000 lbs.
Never hook up trailer safety chains to the mount system. Ensure the safety
1,500 lbs.
chains operate freely around the mount system and do not become entangled.
Product Photo
10,000 lbs.
15,000 lbs.
NOTICE
Before You Begin installation, read all instructions thoroughly.
Prior to towing, ensure all fasteners are tight and all structural components are sound.
Using a torque wrench and 3/8" hex drive socket, torque hardware to 45-55 lb-ft.
Product Registration
CURT Group stands behind our products with industry-leading warranties.
Provide feedback and help us to improve our products by registering your purchase at:
warranty.curtgroup.com/surveys
•
877.287.8634
•
45952-INS-RA
•
PAGE 1
45952
Advertisement
Table of Contents
Related Manuals for curt 45952
Summary of Contents for curt 45952
- Page 1 Using a torque wrench and 3/8" hex drive socket, torque hardware to 45-55 lb-ft. may damage the finish. Product Registration CURT Group stands behind our products with industry-leading warranties. Provide feedback and help us to improve our products by registering your purchase at: warranty.curtgroup.com/surveys CURTMFG.COM...
- Page 2 ™ engineered for this system. If replacement pins are needed, they must be replaced with original factory mount pins (CURT# 45959). Step 1 - Insert into the Trailer Hitch Begin by installing the shank (sold separately) into the trailer hitch receiver and secure it with a hitch pin and clip (sold separately).
Need help?
Do you have a question about the 45952 and is the answer not in the manual?
Questions and answers