curt 45902 Installation Manual

INSTALLATION MANUAL
Level of Difficulty
Easy
Weight Capacity: 2" Ball
Gross trailer weight (GTW)
Weight Capacity: 2-5/16" Ball
Gross trailer weight (GTW)
Parts List
1 Channel mount
1 Dual ball
1 Channel pin
1 Channel clip
1 Hitch pin & clip
Step 1
Insert the adjustable channel mount into
the vehicle's trailer hitch receiver tube and
secure with the provided hitch pin & clip or
hitch lock (hitch lock sold separately).
Step 2
Determine the tow height needed for your
towing situation. Position the dual ball and
insert the provided channel pins through
the channel mount and dual ball. Secure
the pins with the provided channel clips.
WARNING
The provided pins are specifically
engineered for this system. If replacement
pins are needed, they must be replaced
with original factory mount pins.
CURTMFG.COM
• NEED ASSISTANCE?
WARNING
Never exceed the vehicle manufacturer's recommended towing capacity. The ratings of the
channel-mount system are intended to represent the capability of the product and in no way
reflect the ratings or capacity of the towing system it is being used with. The consumer or
operator are strongly advised to know the ratings of the various components of the towing
system and never exceed the limits of the lowest rated component being used.
10,000 lbs.
Use of any pin other than what is provided by the manufacturer
could be a serious safety hazard and will void the warranty.
Never hook up trailer safety chains to the mount system. Ensure the safety
chains operate freely around the mount system and do not become entangled.
20,000 lbs.
Product Photo
NOTICE
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
Product Registration and Warranty
CURT Group stands behind our products with industry-leading warranties.
Provide feedback and help us to improve our products by registering your purchase at:
warranty.curtgroup.com/surveys
• 877.287.8634 • 45902-INS-RB • PAGE 1
45902