Table of Contents
Advertisement
Chapter 2 Preparations
9.
Close the socket lever to fix it.
10. Put the heat sink on processor and fix the heat sink with four screws.
(The direction where a heat sink is installed, refar to illustration of step 11)
Temporarily tighten the four screws diagonally, then tighten them securely.
Make sure that the screw aligns with the screw hole. If not, the screw may damage the motherboard.
11. Make sure that the heat sink is installed on a level with the motherboard.
1
Note
Make sure that the heat sink is properly attached and properly direction.
The server back side
The server front side
Express5800/R120e-2E User's Guide
4
2
3
1. Installing Internal Optional Devices
65
Advertisement
Table of Contents
