Table of Contents
Advertisement
Chapter 2 Preparations
5.
Hold the drive carrier firmly and insert it into
the slot.
6.
Slowly close the handle.
The drive carrier is locked making a clicking sound.
7.
Turn on the server, run SETUP utility, and then specify the boot order from the Boot menu. For details
about the Boot menu, refer to Chapter 2 (1.2.5 Boot) in "Maintenance Guide".
126
• Push it all the way until the handle's lock touches the frame.
Note
• Hold the drive carrier firmly with both hands.
Note
When you push the drive into the slot, confirm the handle got hooked on the frame.
Tips
The saved boot order is cleared when a hard disk drive is added.
Express5800/R120e-2E User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
