Philips VoiceTracer VTR9800 User Manual page 55

pretation, and supports the real-time interpretation for 60 languages. There are three
use modes:
1) Via built-in microphone of device;
2) Via externally-connected wired microphone;
3) Via built-in microphone of 2.4G remote controller.
The user can freely select the language to be identified and interpreted and the voice
pickup mode for commercial interpretation, as indicated in the figure below:
5.3.1 Use of Built-in Microphone of System
When no wired microphone is connected and the microphone on remote controller
is not used, you can use the voice pickup mode via local microphone (and you can also
turn off the local microphone on top right corner of the page). If you want to change
the language interpreted, please click the language bar on bottom of screen.
5.3.2 Use of Wired Microphone
1) Please insert the wired microphone into microphone socket on Smart Meeting Re-
corder VTR9800.
2) Two microphones (optional) can be concurrently used, one language can be set for
every microphone respectively, and the voice will be identified and interpreted auto-
matically during conversation.
5.3.3 Use of Built-in Microphone of Remote Controller
1) The 2.4G remote controller has been matched with Smart Meeting Recorder
VTR9800 when it is delivered. When a new remote controller is used or the remote
controller fails, it will be necessary to carry out matching again. Please carry out code
EN 55