表，功能包括：录音类型、数字降噪、声控设置、监听设置、系 统时间、定时录音、分段录音。相关参考图片如下图所示： (1) 录音类型 在功能菜单中，选择“录音类型”菜单，再按菜单键进入录音 类型菜单。在录音类型菜单中有四种录音类型可供选择： “立体声 录音，标准录音，长时录音，Line in 录音” 。相关参考图片如下： 立体声录音：MP3 格式，高音质，比特率为 128kbps。 标准录音：MP3 格式，音质好，比特率为 32kbps。 长时录音：MP3 格式，普通音质，比特率为 8kbps。 Line in 录音：MP3 格式，录音文件的比特率由上面三种录音类 型决定。 电话录音...
将外接电话线及附送的电话连线分别接入电话录音转接器， 操作方式和使用麦克风录音相同。 Line in 录音： Line in 录音是通过双声道音频线， 将本机与外部音源设备的 音频输出接口正确连接，即可将外部音源的声音转录至本机（音 源设备如收音机、CD、VCD、DVD 等） 。正确操作方法为使用附 送的双声道音频线，一端连接外部音源输出口，另一端接本机的 “Line in ”插孔。 录音操作方式和使用麦克风录音相同。 Line in 录 音前，请把外部音源调到一个适度值，否则录出来的文件声音失 真。 (2) 数字降噪 开启数字降噪时，录音过程中系统可以对音源的噪声部分给 予有效滤除，然后我们就可以得到清晰的有效声音信息。参考界 面图片如下：...
1 Welcome Welcome to the world of Philips! We are honored by your choice and purchase of Philips’ products. You can have Philips’ comprehensive technical supports from our website, e.g. user’s manuals, software downloading and warranty information etc. www.philips.com Product Features •...
2 Important Safety • To avoid a short circuit, do not expose the product to rain or water. • Do not expose the device to excessive heat caused by heating equipment or direct sunlight. • Protect the cables from being pinched, particularly at plugs. Attention! Before using the device please read this User’s Manual carefully.
• When in dangerous environment, please carefully use the earphones or stop using. • Do not use the earphones when driving, cycling, and skateboarding to avoid traffic accident and violating laws and regulations.
3 Your digital recording pen-Voice Tracer What’s in the box? Overview：...
1. Built-in Microphone 2. Microphone Jack (Line in) 3. Earphone Jack 4. Power On/Off 5. HOLD 6. Menu Button 7. Display 8. Record/Play Indicator 9. Play/Pause Button 10. Stop Button，File Folder Switch Button 11. Record Button 12. Volume Button 13. Volume Up ， Previous Track ， Fast Backward ， Menu Selection 14.
When the power switch is in OFF position, the device is cut off from power and can’t switch on. When the power switch is slid to ON, the device starts automatically and then displays “PHILIPS”, see picture below. Then the device displays the stopped playing interface, and then press MENU button for 2 or 3 seconds to return to the main interface.
“ByeBye” is displayed, and then the device is switched off. Switch on: When in power-off state, press down the PLAY button until the startup logo “PHILIPS” is displayed. Note: • The device has a built-in lithium battery. If the device shall be idle for a long time, please slide the power switch to the “OFF”...
• If the device cannot work normally, please make sure the device is not out of power. • When the device is recording, please do not cut the power, otherwise damaged file or malfunction may be resulted. • When the battery indicator “ ”...
buttons on the device, except the slide switch of recording. Then “Hold” is displayed for a while and disappears as shown in the following picture. To unlock buttons, please slide the HOLD switch to OFF. PC Connection The device can be used as a USB mass storage to conveniently store, back up and move files.
5 Recording Before using the device, please read carefully the following instructions. In the stop state of voice mode, press STOP button to select the folder you prefer. Note: When in the Stop state, press STOP button to switch between folders A, B, C, D and MUSIC.
Recording Interface Reference: Illustration of Recording Interface: Note: When the low battery icon occurs, it means the battery is nearly empty and the system will automatically shut down. If the device is recording, the system will automatically save the recorded file then shut down. If the device has low battery, please recharge promptly.
Note: • Prior to recording, please preset the record type you need and the voice activation function. • Make a test recording to make sure that the Voice Tracer settings are correct. • Each folder can store 99 files at most, totally 396 files .(99 files x 4 folders) •...
procedures of built-in microphone. After you connect the external microphone, the built-in microphone is disabled. Please note that the plug of the external microphone must be stereo plug, as shown in the picture below.
6 Voice Mode On the main interface you can select the voice mode with “ ” or “ ” buttons, and then shortly press the menu button to enter. Please refer to the Audio Stop interface below: Voice Playback Interface Specification: Voice Playback In the Stop Mode of recorded file, press STOP button to select the folder you prefer.
Press STOP to stop playing. When the playing is stopped, press down the MENU button for about 2 seconds to return to the main interface. When playing, presses PLAY to pause, “Record/Play” indicator flickers green; press PLAY again to continue playing.
MENU button to enter repeat modes selection menu. You can choose the repeat mode from the menu as shown in the following picture: Repeat one: repeat continuously the current track. Sequence: Play tracks sequentially in selected folder. After playing all the tracks in the current folder, the playing stops automatically.
Press “YES” to delete, “NO” to cancel; then press MENU button to execute. Record Settings You can change settings according to your preference. On the interface with stopped playing, shortly press the MENU button to pop up Functions Menu, the functions include: Record type, Digital Noise Reduction, VA Control, Listen In, System time, Record timer, Auto divide.
MENU button to enter Record type Menu, in which there are four Record types to select: Stereo REC, Standard REC, Long REC, and Line in REC”. See the below related reference pictures: Stereo Record: MP3 format, high sound quality, bit rate: 128kbps.
Line in Record： Line in Recording is a way of recording sound by connecting the device to an audio equipment’s audio output correctly via stereo audio cable (audio equipments such as radio, CD, VCD, DVD etc.). Use the stereo audio cable come with the device to connect the audio equipment’s audio output with “Line in”...
the following picture: Note: This function should only be used in noisy environment. It records in WAV format with bit rate of 384 kbps . Voice-activated Setting A practical function of recording, no button operation is needed. When the function is enabled, in the course of recording, if no voice is detected, the device will automatically pause recording after 3 seconds;...
System Time Setting See the System Time setting interface as follows: On this interface, you can set the current system time and display format. For example: select “Time Format” to show the following menu: There are 2 time formats to choose, namely 12-hour format and 24-hour format.
time. Press “VOL” button to select year, month, day, hour, minute and second; press “ ” or “ ” to change the relevant numbers. Record timer setting Record timer setting: as system time turns to the pre-set time, the device automatically starts recording. On the functions menu, choose the “Record timer”, then press the MENU button to enter “Record timer”...
“ ” to select. The system default sound source is microphone. For choosing sound source please refer to the below picture: If choose the radio channel as a REC source and there are saved channels in the system, the below interface will show; if there’s no saved radio channel in the system, the system will notify that no saved channel available, and set the channel at 94.2MHZ as default.
Note: when using record time setting, must make sure the power switch is in ON position when the system is off. Otherwise the record time can’t be started at the set time. Auto divide During the course of recording, the auto divide feature automatically records into a new file every 30 or 60 minutes.
7 Music mode From the main interface, you can choose music mode with “ ” or “ ” buttons, and then shortly press the MENU button to enter, Music playback interface is as follows: Notice: music files can only be played when they are in “MUSIC”...
interface as follows: (1) Repeat After selecting a menu, the selected area turns white. As illustrated, the “Repeat” is selected, then press MENU button to enter the Repeat Modes Selection Menu. You can choose the preferred repeat mode as follows: Repeat one: repeat continuously the selected track.
button to enter. The Equalizer includes: Normal, Rock, Pop, Classic, Soft, Jazz, and DBB”. See the below pictures: In the Equalizer Mode, you can choose mode with “ ” and “ ” buttons, press MENU button to confirm. (3) A-B Replay From the Playing Menu select the “A-B Repeat”, press MENU button to enter.
replayed for specified times. After playing specified times, the “A” in “A-B” flickers to wait for setting mark A, and the devices resumes normal playing. If A-B Repeat is not needed, use the following method to cancel the A-B Replay mode.
choose the “Replay gap” from the Playing Menu then press MENU button to enter Replay gap setting. Use “ ” and “ ” to adjust Replay gap setting. Delete Files Regarding the operation approach, please refer to the Delete Files in Audio playback section. The lyrics displayed Products support "*.lrc"...
8 Radio Mode Note: Please plug in the earphones. They allow radio reception. Sound can only be heard in the earphones. From the main menu select Radio Mode, press MENU button to enter. See the below picture of Radio Mode: Note: please plug in the earphones.
number is shown on the display. You can choose Save Channel to save it. The device can store 40 radio channels at most. After more than one radio channel is stored, short press “PLAY” or “STOP” to switch among saved radio channels in sequence. Choose Delete to delete a current saved channel or Delete all saved channels.
9 Setting Mode From the main menu select Setting mode, press MENU button to enter. The Setting mode interface is as follows, including Backlight, Language, Auto off, Contrast Setting, memory info, Firmware Version and Clear memory. Backlight Time The backlight time function can be set at: 15, 30, 45, 60 seconds and Constant.
Auto off If there’s no operation on the device for a set time, the system automatically shuts down. If the time is set at 0, the system will not automatically shut down. See the below auto off picture: Contrast The higher the contrast, the whiter is the LCD display. See the below interface picture of adjusting contrast: Memory info Use this function to check the remaining capacity anytime.
Firmware Version You can check the device’s firmware version by using this function. See the below picture: Clear memory You can format the device’s internal memory by using this function. See the below picture:...
Answers to the frequently asked questions are listed here to solve simple problems that may occur with the recording pen. If the problem cannot be solved, please contact the dealer or visit our official website: www.philips.com/support Cannot switch on the device： The battery is empty, please recharge promptly.
11 Technical Parameters Storage Internal storage Estimated recording time (4GB): approximately 1080 hours with Long Recording mode, 280 hours with Standard Recording mode, 68 hours with High Quality Recording mode. Type of internal storage: NAND Flash Portable storage (PC): Yes A fully charged battery will allow you to record for approx 11 hours.
Temperature: 5°–45°C Humidity: 10% – 90%, no condensation...