Table of Contents
Advertisement
4 Start to Use
4.1 Main Page
4.1.1 Turn On
Long press the power button, and then the shield logo of Philips will appear on screen,
which means that the device is successfully turned on.
4.1.2 Dormant State
When the device is normally working, short press the power button and then the de-
vice will immediately get into the dormant state. The device will get into the dormant
state after the un-operated time reaches the pre-set dormant time. When the device
is in dormant state, short press the power button and then the device will be activat-
ed immediately.
4.1.3 Turn Off
Long press the power button and then the dialog box will pop up. Click "Turn Off",
and then the device will be turned off. You can restart the device by clicking "Restart".
4.1.4 Main Page
Please click the corresponding button to carry out the corresponding operation, and
the visual button can be pulled out from top or right side of display screen. The main
page is as indicated in the two figures below:
EN
45
Advertisement
Chapters
Table of Contents
