Table of Contents
Advertisement
To create accounts on the unit
In "User Account" (page 98), specify "User ID", "Password", and the output destinations available to the
user for push scan.
•
You can create up to 50 accounts.
•
You can specify output destinations separately for each user.
–
[System Administrator]: All output destinations can be used.
–
[User Authority]: Each output destination can be enabled / disabled.
–
[Process only items in Favorites]: Only preset conditions can be used.
–
[Process only items on the Custom Screen]: Only preset conditions on the custom screen can be used.
To use LDAP information for user accounts
Enable (set to On) "Settings" (page 98) of "LDAP Authentication".
•
You can then specify the output destinations that will be available to all users.
–
[System Administrator]: All output destinations can be used.
–
[User Authority]: Each output destination can be enabled / disabled.
–
[Process only items in Favorites]: Only preset conditions can be used.
–
[Process only items on the Custom Screen]: Only preset conditions on the custom screen can be used.
Icon displayed at the top of the LCD
Icon
"Settings" in "User Authentication" and "Panel Lock" are set to "Off". The contents
of scan settings are not locked, and the output destinations for push scan are not
restricted.
The contents of scan settings are locked.
The contents of scan settings are not locked.
A user is logged in to the scanner.
No user is logged into the scanner.
State
10 Access Restrictions
75
Advertisement
Table of Contents
