Table of Contents
Advertisement
8 Scanning Documents
8 Scanning Documents
This unit can perform "8.2 Using Pull Scan (Scan from Computer)" (page 71), which scans documents
from a computer using application software (Image Capture Plus / TWAIN / ISIS), and "8.1 Using Push
Scan" (page 57) which scans documents through operation of this unit.
For push scan, it is possible to register scan settings in advance as a job or preset, and to specify "Output
to" and the scan settings for each scan.
Pull Scan
USB connected computer
LAN connected computer
Push Scan
There are three methods for push scan.
1.
Scanning by selecting "Output to" and the scan settings from the home screen.
2.
Scanning by selecting preset condition.
3.
Scanning by selecting jobs.
Required preparation
Output to
Scan to E-mail
Scan to FTP
54
Output to
Scanning by selecting "Output
to" and the scan settings
•
"8.1.1.1 Configure the network
settings" (page 57)
•
"8.1.1.2 Configure the settings
when outputting to "Email""
(page 57)
Note
If necessary, perform
"9.2 How to set up the scan
server" (page 73).
•
"8.1.1.1 Configure the network
settings" (page 57)
•
"8.1.1.3 Configure the settings
when outputting to "FTP""
(page 57)
Note
If necessary, perform
"9.2 How to set up the scan
server" (page 73).
Required preparation
-
•
"8.1.1.1 Configure the network settings" (page
57)
Scanning by selecting the
•
"8.1.1.1 Configure the network
settings" (page 57)
•
"8.1.1.2 Configure the settings
when outputting to "Email""
(page 57)
•
"8.1.1.8 Registering a preset"
(page 58)
Note
If necessary, perform
"9.2 How to set up the scan
server" (page 73).
•
"8.1.1.1 Configure the network
settings" (page 57)
•
"8.1.1.3 Configure the settings
when outputting to "FTP""
(page 57)
•
"8.1.1.8 Registering a preset"
(page 58)
Note
If necessary, perform
"9.2 How to set up the scan
server" (page 73).
preset condition
Advertisement
Table of Contents
