Table of Contents
Advertisement
8.1.1 Preparation
8.1.1.5 Configure the settings when outputting to a LAN connected
computer
1.
Start the Network Scanner Select Tool on the computer that will receive the data.
2.
Add the scanner to the list.
3.
Click [OK].
•
The computer will become available as a destination from the scanner.
8.1.1.6 Configure the settings when outputting to "Cloud"
To set the output destination to "Cloud", you need to set up the scan server. For details about how to
configure the scan server, refer to "9 Scan Server" (page 72).
8.1.1.7 Configure the settings when outputting to "SharePoint"
To set the output destination to "SharePoint", you need to set up the scan server. For details about how to
configure the scan server, refer to "9 Scan Server" (page 72).
8.1.1.8 Registering a preset
"Output to" and the scan settings can be registered as presets (Up to 100 items).
1.
Touch the desired output destination.
•
For details, refer to "8.1.2.1 Basic operation when setting "Output to" settings" (page 62).
2.
Touch the desired setting from the scan settings.
•
For details, refer to "8.1.2.2 Basic operations for specifying scan settings" (page 64).
3.
Touch the "
4.
Configure the scanning settings.
5.
Touch the icon (
8.1.1.9 Registering a preset on the custom screen
Presets can be registered on the custom screen (up to 8 items).
1.
Launch Configuration Web.
•
For details, refer to "12.1 Launch Configuration Web" (page 84).
2.
Open the [Scan] tab.
3.
Click [Custom Screen].
4.
Set presets and icons in the list.
•
Enable (set to On) "Select Custom Icon" to use an icon created by the user. To register a custom icon,
refer to "8.1.1.10 Registering icons" (page 59).
58
" button.
) to complete your selection.
Advertisement
Table of Contents
